How to Repair Roof Shingles
- by siteadmin
Shingles are a great way to protect your roof against weather and water leaks. They need to be replaced when they are damaged or worn.
It's possible to repair a damaged shingle on your own. However, it is always better to hire a professional roofer. This work should be done before any damage is done to your roof. You will save yourself a lot of hassle in the future.
Remove damaged Shingles
Winds can cause your shingles to fall off. This can be caused by a number of factors, including improper nailing, loose nails or shingles that are weak.
You can replace blown-off shingles yourself if you are a handy homeowner. If you are not experienced or do not have the right equipment, we recommend that you call a professional.
After removing the shingles, apply roofing cement around the edges of the roof. This will make your new shingles more resistant to water and prevent them from falling during a storm.
After you have finished your shingle repairs, make sure to clean the area thoroughly. This will stop a lot debris from falling onto your home and creating dangerous conditions. Pick up any shingle debris and bag it. Use a magnetic broom to collect stray nail fragments.
Applying Roofing Cement
Roofing cement can be used as an adhesive to repair roof leaks, dislocated tiles, and other roof problems. It is also useful for fixing small cracks and holes in the shingles.
It is important to use the right type and the right way of roofing cement, whether you are a DIYer, or have an urgent roof leak to fix. Improper application may lead to water damage or other problems down the road.
Roofing cement is made from a mixture of emulsified bitumen (bitumen), mineral spirits, plasticizers, and non-asbestos fibers. It comes in a range of formulas and can be applied either dry or wet. It can be used on most types of roofs, whether residential or commercial. However, some roofing materials may not be compatible.
Placement of New Shingles
Make sure you have installed the drip edge and underlayment correctly before you lay the shingles. The underlayment must be waterproof to protect the sheathing board beneath the shingles against rain and wind. The drip edge must be straight and smooth, and should overhang the roof about half an inch.
If you are using three-tab shingles align them with the layout lines and drive nails 1/2 inch over the slots (including the half slots on each side). If you don't do this, the tabs may drift out of alignment and your roof will appear unprofessional.
Flashing is essential around chimneys, vents, and stack pipes because they are the most susceptible to leakage. Metal flashing is nailed to the roof and sealed to prevent water penetration.
Install a new valley flashing at the intersection of two roof planes. This flashing is usually nailed onto the roofing deck, and sealed with roofing cemented.
Cleaning up after a roof repair is one of the most important parts of the job. This should be done with care so that no shingle fragments end up on your property or in the landscaping.
Picking up stray nails is also part of the cleaning process. This is a common mistake that can cause injury and other problems.
If there is a lot bird poop on the roof, it should be cleaned as soon as you can. This feces is acidic and can damage your roof.
Algae, lichen or moss are also signs that your roof is dirty. These growths thrive in damp areas, which can lead to a premature deterioration.
Shingles are a great way to protect your roof against weather and water leaks. They need to be replaced when they are damaged or worn. It's possible to repair a damaged shingle on your own. However, it is always better to hire a professional roofer. This work should be done before any damage is done…